CRF1000L H/D Tubeless 21"/18" Wheels-RRP 593

IMG_3281.JPG
IMG_3283.JPG
IMG_3284.JPG
IMG_3285.JPG
IMG_3286.JPG
IMG_3287.JPG
AT  FRONT HUB-500x500.jpg
AT  REAR-500x500.jpg
AT RG-500x500.jpg
BC0013C.jpg
RRP593 FB-500x500.jpg
RRP593 FG-500x500.jpg
RRP593RB-500x500.jpg
RRP593RG-500x500.jpg
IMG_3281.JPG
IMG_3283.JPG
IMG_3284.JPG
IMG_3285.JPG
IMG_3286.JPG
IMG_3287.JPG
AT  FRONT HUB-500x500.jpg
AT  REAR-500x500.jpg
AT RG-500x500.jpg
BC0013C.jpg
RRP593 FB-500x500.jpg
RRP593 FG-500x500.jpg
RRP593RB-500x500.jpg
RRP593RG-500x500.jpg

CRF1000L H/D Tubeless 21"/18" Wheels-RRP 593

2,499.00

Now available!! from Rally Raid Products, Be aware due to the custom nature of this product Lead times can be up to 6 weeks

 

We have designed, developed and manufactured our own heavy-duty, tubeless spoked wheels for the new Honda CRF1000L Africa Twin, based on our rally & adventure experiences.

These are a big improvement over the tubed OEM versions, as we prefer to run tubeless tyres on an adventure motorcycle of this size, as repairing punctures can be much easier than those with inner tubes fitted.

The OEM Honda wheels, which use plated steel spokes and nipples, have had corrosion problems so we have addressed this by using stainless steel heavy duty spokes and plated brass nipples.

Both front and rear hubs are manufactured from 6082T6 billet aluminium alloy, and black anodised for a durable finish.

Benefits of our wheel kit:

• Rear hub is designed to work with the OEM cush drive and rubbers.
• Rear rim is slightly wider, 18"x4.25, rather than the narrower 18"x4.00 OEM rim, to give a broader choice of tubeless tyres. Our rear hub/rim is 36 spoke pattern, rather than the OEM 32 spoke design, much stronger and resistant to flex.
• Hubs supplied with bearings & seals, the front hub uses oversize bearings, same as the OEM rear,(because the OEM front hub has smaller bearings than the CB500X), to give more strength, and less spare parts to be carried.
• Both front & rear hubs designed to work with OEM discs, ABS rings and OEM screws.
• The front hub is designed so that it is possible to move the ABS ring over to the opposite side, then turn the wheel round, to even out knobblie pattern tyre wear on long trips.
• High-tensile "Bulldog" spokes are 33% larger cross section, and consequently 60% stronger tensile strength than the OEM plated mild steel spokes, plus they are corrosion-proof.
• Nipples are nickel-plated brass, again, corrosion-proof, maintenance free.

Both wheels are professionally sealed with a tubeless conversion by Bartubeless, with a 4 year warranty on each wheel.

Both rims are high-grade aluminium alloy, with tubeless "bump" for correct sealing.

The rim sizes are 21"x2.15 front and 18"x4.25 rear, 36 spoke hole pattern, and are available in either black or gold powder-coat.

We prefer the powder-coat rather than anodising for the reason it is more durable, less resistant to marking when riding off-road, or changing tyres. And also they can be "touched up" with paint, if required, if they do happen to get damaged.

We have used these wheels for over 12 months now in rallies such as Illyria Rally, and with Rocky Mountain Adventure Bike Touring Company in Canada in order to prove our design and strength, and the Bartubeless conversion is something we have been using on our CB500X Adventure wheel kits for 3 years with zero problems.
 

Colour:
Quantity:
Add To Cart